Our Protocols Products
- Protocol Converter (RS 232 or RS 485 mode)
Various instrument and analysers have their proprietary protocols for communication. Many a times it becomes impossible to network them. A protocol converter can convert from any protocol to standard protocol. Most commonly used are from proprietary protocol to MODBUS&trade RTU protocol. The protocol converter is a customised device and can be configured for any proprietary protocol, provided the details are available. These are powerful embedded systems
These devices has two serial ports in RS 232 or RS 485 communication mode. They work at 9,600 baud rate. They are in DIN mountable device. They work on any voltage between 9V DC to 24 V DC. (Other voltages are available on request)
Download the PDF data sheet by clicking here
- Timer Converter (Di,Do & T2 to RS232)
This is a small converter which converts two digital inputs, two digital outputs and two timer inputs to serial interface. The digital inputs and timer inputs can be read using the serial port. There are two isolated digital inputs and two isolated timer inputs. One timer input is averaging timer input while other is totalising input. The averaging timer input can be configured using serial port for various averaging options. The totalising timer can be reset using the serial commands. The Digital Input status can be read on serial port as well as digital output status can be configured using serial commands.
These devices have one serial ports in RS 232 mode. They work at 9,600 baud rate. They are in DIN mountable device. They work on any voltage between 9V DC to 24 V DC. (Other voltages are available on request). The typical input needed is TTL level and the timer input can accept the frequency up-to 4 Khz. Being a Schmitt input, it can accept any waveform.
Download the PDF data sheet by clicking here
- Print Format Converter (Centronics™ or RS 232)
Various instrument and analysers have their own printing report formats. They print the reports using a printer attached to the instrument or analyser. Many a times the format of these reports is not matching to the one specified by the user or government agencies.
These print format converters convert the fixed print format to any other format user is in need of. These are powerful embedded systems and they are user configurable.
They are in DIN mountable device. They work on any voltage between 9V DC to 24 V DC. (Other voltages are available on request)
Download the PDF data sheet by clicking here.