Our Engineering Software Products & Projects |
- Pristine Supervisory Control & Data Acquisition System
- Ladder Editor for Programmable Logic Controller (PLC)
- Instrument Controller Software
- Process Control PC Software
This is a complete SCADA system. This is sold as a product by us. We have a full section giving all the information of this product.
Click here to go to the home page of Pristine SCADA system.
The software is based on Microsoft Windows™ Operating System. It supports almost all versions of Windows, Windows 95™, Windows 98™, Windows Me™, Windows NT™, Windows 2000™ & Windows Xp™. This is a graphics and text editor. This uses standard Ladder logic and commands. Cut - Copy - Paste options are available. Once the programme is compiled, it can be downloaded to the PLC device using a serial port. The drivers for the specific PLC can be written on request. On Line Error checking, Tool Tip help and movement using mouse pointer are available. The editor can be programmed for maximum number of memory usage using the PLC device characteristics. Used memory and available memory are shown on the editor screen. One can pick up the Ladder symbols from the tool bar. User configurable commands as well as user can define
Products (Hardware & Software) based on this design are presently sold in India.
One can download the demonstration software by clicking here. This demonstration works for maximum 50 lines.
The software is based on Microsoft Windows™ Operating System. It supports almost all versions of Windows, Windows 95™, Windows 98™, Windows Me™, Windows NT™, Windows 2000™ & Windows Xp™. This is a software which graphically controls, reads and writes a single instrument. The drivers of the various standard instruments are written as well as can be written on request. The instrument is read and controlled on the serial port. The serial port protocol can be customised protocol or standard MODBUS™ protocol. Again the drivers for the customised protocol can be written on request.
Due to this software, one can read one instrument or multiple instruments using a standard PC. The read out data can be stored and graphically represented. The reading can be obtained on user settable periodic interval.
One of the interesting feature of this product is user can initially set the pattern of the readings called 'profile'. Based on the periodic time interval, an instrument can be programmed as set by the profile. If there is any mismatch between profile parameters and actual parameter, alarm can be set.
This software is extremely important to read single instrument or multiple instruments unattended over a long period of time. One can even programme a complete process instrumentation, process-wise, time-wise or both. This can be done completely unattended.
One can download the demonstration software by clicking here. This demonstration works for maximum 60 minutes.
Imagine the advantages of controlling process using PC rather than PLC. This software does exactly that. It is at attractive price that it is cheaper than a PLC
The software is based on Microsoft Windows™ Operating System. It supports almost all versions of Windows, Windows 95™, Windows 98™, Windows Me™, Windows NT™, Windows 2000™ & Windows Xp™. This is a software which graphically controls, reads and writes multiple devices on process plant. The drivers of the various standard instruments or devices are written as well as can be written on request. The instrument is read and controlled on the serial port. The serial port protocol can be customised protocol or standard MODBUS™ protocol. Again the drivers for the customised protocol can be written on request.
Due to this software, shift the process very easily using the same instrumentation. The read out data can be stored and graphically represented. The reading can be obtained on user settable periodic interval.
The shift of the models using same instrumentation and devices like motor control becomes very easy. Due to single PC control, in one go all the instruments and devices can be set to produce different model. This becomes a very convenient tool rather than complex PLC programming. Due to the decrease in the cost of the PC and software this becomes an easy & convenient solution.
As this software is fully customised for specific applications, please contact us at sales@ktcpl.com for your specific needs and we will get back to you with our proposal.
|
These projects are listed here to show our development capabilities. The intellectual property rights as well as manufacturing rights may or may not be with us. However if some one is interested in purchasing these products we can forward the inquiry to the concern company. Kindly send us you requirement at sales@ktcpl.com |